Our Products
Here you will find all our products sorted by vehicle type.
Made in Germany
The 30mph Module
How the module works
If the module is installed, the roof of your car can be opened/closed up to a speed of 30mph or 50Km/h.
Before installation
Please read this instruction carefully and take yourself some time for proper installation of the module. Please note, that you can damage your car and/or the module if it is not correct installed.
Note
The installation and use of the module is on your own risk. Do not open/close the roof on bad roads. You can damage the roof by opening/closing while driving. You might loose the warranty of your car. The installation and use of this module is on your own risk.
Installation
The exact installation steps can be found in the installation instructions.
Download installation instructions
Technical data for the module
- Operating Voltage: 7-17V
- Power Input: 12 mA (when ignition is on)
- Size: 40x40x20mm3
Price
89 € plus shipping
advance payment only
Shipping in Germany 4,90
Shipping outside Germany 7,90
Pay comfortably with PayPal
The One Touch Module
How the module works
The installation of this module means that the switch no longer has to be held until the roof it completely open or closed. The roof switch need only be touched briefly (>0.5 sec) and the module extends the respective impulse so that the roof opens or closes fully automatically. The automatic movement of the roof can be stopped at any time by pressing either button again
Before installation
Please read this instruction carefully and take yourself some time for proper installation of the module. Please note, that you can damage your car and/or the module if it is not correct installed.
Note
The fitting of the Module can lead to the expiration of your warranty of your car. The installation and use of this module is carried out at your own risk. Do not open or close the roof if people might be nearby the car. People could be injured through the use of this module.
Installation
The exact installation steps can be found in the installation instructions.
Download installation instructions
Technical data for the module
- Operating Voltage: 7-17V
- Power Input: 6 mA
- Size: 40 x 40 x 20 mm3
Price
89 € plus shipping
advance payment only
Shipping in Germany 4,90
Shipping outside Germany 7,90
Pay comfortably with PayPal
The Comfort Module
How the module works
The module only uses functions which were originally built into the vehicle. All data relevant to convertible top control (e.g. limit switches, window position, speed) will be continuously monitored. All OEM safety functions (under / over voltage cut-off, thermal protection, etc.) remain intact.
Before installation
Please read these instructions carefully and take your time with the installation. Performing the installation improperly can cause damage to the module or to electronic components in your vehicle. Claims cannot be asserted for consequences which arise out of disregard for these installation instructions. If you are not confident in doing the installation yourself, please obtain the services of a vehicle specialist.
Note
Installation of this module may be grounds to invalidate your vehicle's homologation (general type certification) and/or its manufacturer's warranty. Do not operate the convertible top without the presence of another person – there is no entanglement protection.
The installation and operation of the module is at your own risk.
Installation
The exact installation steps can be found in the installation instructions.
Download installation instructions
The module's functional scope and operation
Tap function for the top's switch:
Now you need only to tap (>2s) with your finger on the convertible top switch, then the top will automatically open or close. This automatic operation can be interrupted at any time by simply tapping on the switch again in the opposite direction. When the top switch is tapped again in the same direction while the roof moves, the windows will stay open at the end of the roof movement. You can start the top's operation, pull out the ignition key, get out of the car and lock it – the top will continue to automatically close or open without the ignition.
Operating the top while driving up to a speed of 60 km/h maximum:
The speed limit for top operation is set to 60Km/h.
Operating the top per OEM remote control:
Press the open switch on the remote control >3s and the top will open automatically. Closing the top works in the same way except that the close button on the remote control is used. As a safety precaution, opening the top can be terminated with the close button or closing the top can be terminated with the open button.
You can start the top's operation, start the engine and drive away while the top is still moving – it will continue the movement until it’s opened/closed completely.
Operating the windows per OEM remote control:
When top is closed and windows are still open they can be closed by a >3s press on the close button of the OEM key (same command as for closing the top by remote).
Battery Safe Function:
The module will go to power down mode automatically when it is not needed. It will then consume less then 0,2mA – that means that the battery will not be discharged by the module.
Service mode for technical vehicle inspections and diagnostic purposes:
Change to service mode:
Turn ignition on and press the central lock button at the drivers door for >5s: an acoustic signal will state that the module is “locked” – that means in workshop mode and behaves as it wouldn’t be installed. You even won’t find it with car diagnostic test equipment.
Change to normal mode:
Turn ignition on and press the central unlock button at the drivers door for >5s: an acoustic signal will state that the module is “unlocked” – that means all functions mentioned above are available now.
Price
219 € plus shipping
advance payment only
Shipping in Germany 4,90
Shipping outside Germany 7,90
Pay comfortably with PayPal
The Remote Roof Module
How the module works
The installation of this module means that you can open and close the roof with your Audi remote Key. The roof will open if you press the open-button of the remote key three times within 5 seconds. To close the roof operates in the same way: press the close-button of the remote key three times within 5 seconds. In case necessary, the opening of the roof can be stopped by pressing the close-button of the remote key. You also can stop the closing by pressing the open-button of the key.
Before installation
Please read this guide carefully and take your time with the installation. Incorrect installation of this module can cause damage to the electronics of your car. No responsibility can be taken for neglect of these fitting instructions. This installation should only be carried out by trained personnel.
Note
The fitting of the Module can lead to the expiration of your warranty of your car. The installation and use of this module is carried out at your own risk. Do not open or close the roof if people might be nearby the car. People could be injured through the use of this module.
Installation
The exact installation steps can be found in the installation instructions.
Download installation instructions
Technical data for the module
- Operating Voltage: 7-17V
- Power Input: ‹ 4 mA
- Size: 40 x 40 x 20 mm3
Price
149 € plus shipping
advance payment only
Shipping in Germany 4,90
Shipping outside Germany 7,90
Pay comfortably with PayPal
The One Touch Module
How the module works
The installation of this module means that the switch no longer has to be held until the roof it completely open or closed. The roof switch need only be touched briefly (>0.5 sec) and the module extends the respective impulse so that the roof opens or closes fully automatically. The automatic movement of the roof can be stopped at any time by pressing either button again.
Before installation
Please read this guide carefully and take your time with the installation. Incorrect installation of this module can cause damage to the electronics of your car. No responsibility can be taken for neglect of these fitting instructions. This installation should only be carried out by trained personnel.
Note
The fitting of the Module can lead to the expiration of your warranty of your car. The installation and use of this module is carried out at your own risk. Do not open or close the roof if people might be nearby the car. People could be injured through the use of this module.
Installation
The exact installation steps can be found in the installation instructions.
Download installation instructions
Technical data for the module
- Operating Voltage: 7-17V
- Power Input: 5 mA
- Size: 40 x 40 x 20 mm3
Price
89 € plus shipping
advance payment only
Shipping in Germany 4,90
Shipping outside Germany 7,90
Pay comfortably with PayPal
The Comfort Module
How the module works
The module only uses functions which were originally built into the vehicle. All data relevant to convertible top control (e.g. limit switches, window position, speed) will be continuously monitored. All OEM safety functions (under / over voltage cut-off, thermal protection, etc.) remain intact.
Before installation
Please read these instructions carefully and take your time with the installation. Performing the installation improperly can cause damage to the module or to electronic components in your vehicle. Claims cannot be asserted for consequences which arise out of disregard for these installation instructions. If you are not confident in doing the installation yourself, please obtain the services of a vehicle specialist.
Note
Installation of this module may be grounds to invalidate your vehicle's homologation (general type certification) and/or its manufacturer's warranty. Do not operate the convertible top without the presence of another person – there is no entanglement protection.
The installation and operation of the module is at your own risk.
Installation
The exact installation steps can be found in the installation instructions.
Download installation instructions
The module's functional scope and operation
Tap function for the top's switch:
Now you need only to tap (>2s) with your finger on the convertible top switch, then the top will automatically open or close. This automatic operation can be interrupted at any time by simply tapping on the switch again in the opposite direction. When the top switch is tapped again in the same direction while the roof moves, the windows will stay open at the end of the roof movement. You can start the top's operation, pull out the ignition key, get out of the car and lock it – the top will continue to automatically close or open without the ignition.
Operating the top while driving up to a speed of 60 km/h maximum:
The speed limit for top operation is set to 60Km/h.
Operating the top per OEM remote control:
Press the open switch on the remote control >3s and the top will open automatically. Closing the top works in the same way except that the close button on the remote control is used. As a safety precaution, opening the top can be terminated with the close button or closing the top can be terminated with the open button.
You can start the top's operation, start the engine and drive away while the top is still moving – it will continue the movement until it’s opened/closed completely.
Operating the windows per OEM remote control:
When top is closed and windows are still open they can be closed by a >3s press on the close button of the OEM key (same command as for closing the top by remote).
Battery Safe Function:
The module will go to power down mode automatically when it is not needed. It will then consume less then 0,2mA – that means that the battery will not be discharged by the module.
Service mode for technical vehicle inspections and diagnostic purposes:
Change to service mode:
Turn ignition on and press the central lock button at the drivers door for >5s: an acoustic signal will state that the module is “locked” – that means in workshop mode and behaves as it wouldn’t be installed. You even won’t find it with car diagnostic test equipment.
Change to normal mode:
Turn ignition on and press the central unlock button at the drivers door for >5s: an acoustic signal will state that the module is “unlocked” – that means all functions mentioned above are available now.
Price
219 € plus shipping
advance payment only
Shipping in Germany 4,90
Shipping outside Germany 7,90
Pay comfortably with PayPal
The Comfort Module
How the module works
The module only uses functions which were originally built into the vehicle. All data relevant to convertible top control (e.g. limit switches, window position, speed) will be continuously monitored. All OEM safety functions (under / over voltage cut-off, thermal protection, etc.) remain intact.
Before installation
Please read these instructions carefully and take your time with the installation. Performing the installation improperly can cause damage to the module or to electronic components in your vehicle. Claims cannot be asserted for consequences which arise out of disregard for these installation instructions. If you are not confident in doing the installation yourself, please obtain the services of a vehicle specialist.
Note
Installation of this module may be grounds to invalidate your vehicle's homologation (general type certification) and/or its manufacturer's warranty. Do not operate the convertible top without the presence of another person – there is no entanglement protection. The installation and operation of the module is at your own risk.
Installation
The exact installation steps can be found in the installation instructions.
Download installation instructions
The module's functional scope and operation
Tap function for the top's switch:
Now you need only to tap (>2s) with your finger on the convertible top switch, then the top will automatically open or close. This automatic operation can be interrupted at any time by simply tapping on the switch again in the opposite direction. When the top switch is tapped again in the same direction while the roof moves, the windows will stay open at the end of the roof movement. You can start the top's operation, pull out the ignition key, get out of the car and lock it – the top will continue to automatically close or open without the ignition.
Operating the top while driving up to a speed of 60 km/h maximum:
The speed limit for top operation is set to 60Km/h.
Operating the top per OEM remote control:
Press the open switch on the remote control >3s and the top will open automatically. Closing the top works in the same way except that the close button on the remote control is used. As a safety precaution, opening the top can be terminated with the close button or closing the top can be terminated with the open button. You can start the top's operation, start the engine and drive away while the top is still moving – it will continue the movement until it’s opened/closed completely.
Operating the windows per OEM remote control:
When top is closed and windows are still open they can be closed by a >3s press on the close button of the OEM key (same command as for closing the top by remote).
Battery Safe Function:
The module will go to power down mode automatically when it is not needed. It will then consume less then 0,2mA – that means that the battery will not be discharged by the module.
Service mode for technical vehicle inspections and diagnostic purposes:
Change to service mode: Turn ignition on and press the central lock button at the drivers door for >5s: an acoustic signal will state that the module is “locked” – that means in workshop mode and behaves as it wouldn’t be installed. You even won’t find it with car diagnostic test equipment. Change to normal mode: Turn ignition on and press the central unlock button at the drivers door for >5s: an acoustic signal will state that the module is “unlocked” – that means all functions mentioned above are available now.
Price
219 € plus shipping
advance payment only
Shipping in Germany 4,90
Shipping outside Germany 7,90
Pay comfortably with PayPal
The One Touch Module
How the module works
The installation of this module means that the switch no longer has to be held until the roof it completely open or closed. The roof switch need only be touched briefly (>0.5 sec) and the module extends the respective impulse so that the roof opens or closes fully automatically. The automatic movement of the roof can be stopped at any time by pressing either button again.
Before installation
Please read this instruction carefully and take yourself some time for proper installation of the module. Please note, that you can damage your car and/or the module if it is not correct installed.
Note
Installation of this module may be grounds to invalidate your vehicle's homologation (general type certification) and/or its manufacturer's warranty. The installation and use of this module is carried out at your own risk. Do not open or close the roof if people might be nearby the car. People could be injured through the use of this module.
Installation
The exact installation steps can be found in the installation instructions.
Download installation instructions
Price
89 € plus shipping
advance payment only
Shipping in Germany 4,90
Shipping outside Germany 7,90
Pay comfortably with PayPal
The Remote Roof Module
How the module works
The installation of this module means that you can open and close the roof with your BMW remote key. The roof will open if you press the open-button of the remote key three times within 5 seconds. To close the roof operates in the same way: press the close-button of the remote key three times within 5 seconds. In case necessary, the opening of the roof can be stopped by pressing the close-button of the remote key. You also can stop the closing by pressing the open-button of the key.
Before installation
Please read this guide carefully and take your time with the installation. Incorrect installation of this module can cause damage to the electronics of your car. No responsibility can be taken for neglect of these fitting instructions. This installation should only be carried out by trained personnel.
Note
Installation of this module may be grounds to invalidate your vehicle's homologation (general type certification) and/or its manufacturer's warranty. The installation and use of this module is carried out at your own risk. Do not open or close the roof if people might be nearby the car. People could be injured through the use of this module.
Installation
class="py-3"The exact installation steps can be found in the installation instructions.
Download installation instructions
Technische Daten des Moduls
- Operating voltage: 7-17V
- Current consumption: 6 mA (standby)
- Size: 40 x 40 x 20 mm3
- Weight: ca. 50g (without relais)
Price
159 € plus shipping
advance payment only
Shipping in Germany 4,90
Shipping outside Germany 7,90
Pay comfortably with PayPal
The 30mph Module
How the module works
If the module is installed, the roof of your car can be opened/closed up to a speed of 20, 30 or 50Km/h (programmable).
Before installation
Please read this instruction carefully and take yourself some time for proper installation of the module. Please note, that you can damage your car and/or the module if it is not correct installed.
Note
The installation and use of the module is on your own risk. Do not open/close the roof on bad roads. You can damage the roof by opening/closing while driving. You might loose the warranty of your car. The installation and use of this module is on your own risk.
Installation
The exact installation steps can be found in the installation instructions.
Download installation instructions
Technische Daten des Moduls
- Voltage range: 7-17V
- Current consumption: 12 mA (when ignition is on)
- Size: 40 x 40 x 20 mm3
- Weight: 50g
Price
89 € plus shipping
advance payment only
Shipping in Germany 4,90
Shipping outside Germany 7,90
Pay comfortably with PayPal
The One Touch Module
How the module works
The installation of this module means that the switch no longer has to be held until the roof it completely open or closed. The roof switch need only be touched briefly (>0.5 sec) and the module extends the respective impulse so that the roof opens or closes fully automatically. The automatic movement of the roof can be stopped at any time by pressing either button again.
Before installation
Please read this instruction carefully and take yourself some time for proper installation of the module. Please note, that you can damage your car and/or the module if it is not correct installed.
Note
Installation of this module may be grounds to invalidate your vehicle's homologation (general type certification) and/or its manufacturer's warranty. The installation and use of this module is carried out at your own risk. Do not open or close the roof if people might be nearby the car. People could be injured through the use of this module.
Installation
The exact installation steps can be found in the installation instructions.
Download installation instructions
Price
89 € plus shipping
advance payment only
Shipping in Germany 4,90
Shipping outside Germany 7,90
Pay comfortably with PayPal
The Remote Roof Module
How the module works
The installation of this module means that you can open/close the roof by your BMW remote Key. The roof will open if you press the open-button of the remote key three times within 5 seconds. To close the roof operates in the same way: press the close-button of the remote key three times within 5 seconds. The movement of the roof starts 5s after the last press on the button. In case of necessity the opening of the roof can be stopped by pressing the close- button of the remote key. You also can stop the closing by pressing the open-button of the key. You also can close all windows if the roof is closed by pressing three times the close- button.
Before installation
Please read this guide carefully and take your time with the installation. Incorrect installation of this module can cause damage to the electrics of your car. No responsibility can be taken for neglect of these fitting instructions. This installation should only be carried out by trained personnel.
Note
The fitting of the Remote Roof Module can lead to the expiry of your warranty of your car. The installation and use of this module is carried out at your own risk. People could be injured through the use of this module.
Installation
The exact installation steps can be found in the installation instructions.
Download installation instructions
Price
139 € plus shipping
advance payment only
Shipping in Germany 4,90
Shipping outside Germany 7,90
Pay comfortably with PayPal
The One Touch Module
How the module works
The installation of this module means that the switch no longer has to be held until the roof is completely open or closed. The roof switch need only be touched briefly (>0.5 sec) and the module extends the respective impulse so that the roof opens or closes fully automatically. The automatic movement of the roof can be stopped at any time by pressing either button again.
Before installation
Please read this guide carefully and take your time with the installation. Incorrect installation of the module can cause damage to the electrics of your car. No responsibility can be taken for neglect of these fitting instructions. This installation should only be carried out by trained personnel.
Note
The fitting of the One Touch Module can lead to the expiry of your warranty of your car. The installation and use of this module is carried out at your own risk. People could be injured through the use of this module.
Installation
The exact installation steps can be found in the installation instructions.
Download installation instructions
Price
89 € plus shipping
advance payment only
Shipping in Germany 4,90
Shipping outside Germany 7,90
Pay comfortably with PayPal
The Comfort Module
How the module works
The module only uses functions which were originally built into the vehicle. All data relevant to convertible top control (e.g. limit switches, window position, speed) will be continuously monitored. All OEM safety functions (under / over voltage cut-off, thermal protection, etc.) remain intact.
Before installation
Please read these instructions carefully and take your time with the installation. Performing the installation improperly can cause damage to the module or to electronic components in your vehicle. Claims cannot be asserted for consequences which arise out of disregard for these installation instructions. If you are not confident in doing the installation yourself, please obtain the services of a vehicle specialist.
Note
Installation of this module may be grounds to invalidate your vehicle's homologation (general type certification) and/or its manufacturer's warranty. Do not operate the convertible top without the presence of another person – there is no entanglement protection. The installation and operation of the module is at your own risk.
Installation
The exact installation steps can be found in the installation instructions.
Download installation instructions
The module's functional scope and operation
Tap function for the top's switch:
Now you need only to tap (>2s) with your finger on the convertible top switch, then the top will automatically open or close. This automatic operation can be interrupted at any time by simply tapping on the switch again in the opposite direction. When the top switch is tapped again in the same direction while the roof moves, the windows will stay open at the end of the roof movement. You can start the top's operation, pull out the ignition key, get out of the car and lock it – the top will continue to automatically close or open without the ignition.
Operating the top while driving (up to a speed of 50 km/h maximum):
Up to a pre-programmed speed (though not greater than 50 km/h), you can operate the top while driving.
Threshold speed adjustmen:
Press the central switch for the window lifts in the drivers door in direction “close“ for >4s (windows must be closed) and the current speed will be set as new threshold limit. An acoustic signal will be sounded as confirmation that the new speed has been set. The maximum threshold speed is 50Km/h. The default programmed speed is 50Km/h for a new module.
Operating the top per OEM remote control:
Press the Open switch on the remote control >3s and the top will open automatically. Closing the top works in the same way except that the Close button on the remote control is used. When the switch is pressed again in the same direction while the roof moves, the windows will stay open at the end of the roof movement. As a safety precaution, opening the top can be terminated with the Close button or closing the top can be terminated with the Open button.
You can start the top's operation, start the engine and drive away while the top is still moving – it will continue the movement until it’s opened/closed completely.
Battery Safe Function:
The module will go to power down mode automatically when it is not needed. It will then consume less then 0,2mA – that means that the battery will not be discharged by the module.
Service mode for technical vehicle inspections and diagnostic purposes:
You can change the mode from normal mode to service mode (and back...) in the same way as speed limit is set, except that here the car is standing still. An acoustic signal will confirm the change of the mode.
Price
219 € plus shipping
advance payment only
Shipping in Germany 4,90
Shipping outside Germany 7,90
Pay comfortably with PayPal
The Comfort Module
How the module works
The module only uses functions which were originally built into the vehicle. All data relevant to convertible top control (e.g. limit switches, window position, speed) will be continuously monitored. All OEM safety functions (under / over voltage cut-off, thermal protection, etc.) remain intact.
Before installation
Please read these instructions carefully and take your time with the installation. Performing the installation improperly can cause damage to the module or to electronic components in your vehicle. Claims cannot be asserted for consequences which arise out of disregard for these installation instructions. If you are not confident in doing the installation yourself, please obtain the services of a vehicle specialist.
Note
Installation of this module may be grounds to invalidate your vehicle's homologation (general type certification) and/or its manufacturer's warranty. Do not operate the convertible top without the presence of another person – there is no entanglement protection. The installation and operation of the module is at your own risk.
Installation
The exact installation steps can be found in the installation instructions.
Download installation instructions
The module's functional scope and operation
Tap function for the top's switch:
Now you need only to tap (>2s) with your finger on the convertible top switch, then the top will automatically open or close. This automatic operation can be interrupted at any time by simply tapping on the switch again in the opposite direction. When the top switch is tapped again in the same direction while the roof moves, the windows will stay open at the end of the roof movement. You can start the top's operation, pull out the ignition key, get out of the car and lock it – the top will continue to automatically close or open without the ignition.
Operating the top while driving (up to a speed of 50 km/h maximum):
Up to a pre-programmed speed (though not greater than 50 km/h), you can operate the top while driving.
Threshold speed adjustmen:
Press the central switch for the window lifts in the drivers door in direction “close“ for >4s (windows must be closed) and the current speed will be set as new threshold limit. An acoustic signal will be sounded as confirmation that the new speed has been set. The maximum threshold speed is 50Km/h. The default programmed speed is 50Km/h for a new module.
Operating the top per OEM remote control:
Press the Open switch on the remote control >3s and the top will open automatically. Closing the top works in the same way except that the Close button on the remote control is used. When the switch is pressed again in the same direction while the roof moves, the windows will stay open at the end of the roof movement. As a safety precaution, opening the top can be terminated with the Close button or closing the top can be terminated with the Open button.
You can start the top's operation, start the engine and drive away while the top is still moving – it will continue the movement until it’s opened/closed completely.
Battery Safe Function:
The module will go to power down mode automatically when it is not needed. It will then consume less then 0,2mA – that means that the battery will not be discharged by the module.
Service mode for technical vehicle inspections and diagnostic purposes:
You can change the mode from normal mode to service mode (and back...) in the same way as speed limit is set, except that here the car is standing still. An acoustic signal will confirm the change of the mode.
Price
219 € plus shipping
advance payment only
Shipping in Germany 4,90
Shipping outside Germany 7,90
Pay comfortably with PayPal
The Remote Roof Module
How the module works
The installation of this module means that you can open/close the roof by your BMW remote Key. The roof will open if you press the open-button of the remote key three times within 5 seconds. To close the roof operates in the same way: press the close-button of the remote key three times within 5 seconds. The movement of the roof starts 5s after the last press on the button. In case of necessity the opening of the roof can be stopped by pressing the close- button of the remote key. You also can stop the closing by pressing the open-button of the key. You also can close all windows if the roof is closed by pressing three times the close- button.
Before installation
Please read this guide carefully and take your time with the installation. Incorrect installation of this module can cause damage to the electrics of your car. No responsibility can be taken for neglect of these fitting instructions. This installation should only be carried out by trained personnel.
Note
The fitting of the One Touch Module can lead to the expiry of your warranty of your car. The installation and use of this module is carried out at your own risk. People could be injured through the use of this module.
Installation
The exact installation steps can be found in the installation instructions.
Download installation instructions
Technische Daten des Moduls
- Operating Voltage: 7-17V
- Power Input: 4mA
- Size: 40mm x 40mm x 20mm3
Price
139 € plus shipping
advance payment only
Shipping in Germany 4,90
Shipping outside Germany 7,90
Pay comfortably with PayPal
The One Touch Module
How the module works
The installation of this module means that the switch no longer has to be held until the roof it completely open or closed. The roof switch need only be touched briefly (>0.5 sec) and the module extends the respective impulse so that the roof opens or closes fully automatically. The automatic movement of the roof can be stopped at any time by pressing either button again.
Before installation
Please read this guide carefully and take your time with the installation. Incorrect installation of this module can cause damage to the electrics of your car. No responsibility can be taken for neglect of these fitting instructions. This installation should only be carried out by trained personnel.
Note
The fitting of the One Touch Module can lead to the expiry of your warranty of your car. The installation and use of this module is carried out at your own risk. People could be injured through the use of this module.
Installation
The exact installation steps can be found in the installation instructions.
Download installation instructions
Technische Daten des Moduls
- Operating Voltage: 7-17V
- Power Input: 4mA
- Size: 40mm x 40mm x 20mm33
Price
89 € plus shipping
advance payment only
Shipping in Germany 4,90
Shipping outside Germany 7,90
Pay comfortably with PayPal
The Comfort Module
How the module works
The module only uses functions which were originally built into the vehicle. All data relevant to convertible top control (e.g. limit switches, window position, speed) will be continuously monitored. All OEM safety functions (under / over voltage cut-off, thermal protection, etc.) remain intact.
Before installation
Please read these instructions carefully and take your time with the installation. Performing the installation improperly can cause damage to the module or to electronic components in your vehicle. Claims cannot be asserted for consequences which arise out of disregard for these installation instructions. If you are not confident in doing the installation yourself, please obtain the services of a vehicle specialist.
Note
Installation of this module may be grounds to invalidate your vehicle's homologation (general type certification) and/or its manufacturer's warranty. Do not operate the convertible top without the presence of another person – there is no entanglement protection. The installation and operation of the module is at your own risk.
Installation
The exact installation steps can be found in the installation instructions.
Download installation instructions
The module's functional scope and operation
Tap function for the top's switch:
Now you need only to tap (>2s) with your finger on the convertible top switch, then the top will automatically open or close. This automatic operation can be interrupted at any time by simply tapping on the switch again in the opposite direction. When the top switch is tapped again in the same direction while the roof moves, the windows will stay open at the end of the roof movement. You can start the top's operation, pull out the ignition key, get out of the car and lock it – the top will continue to automatically close or open without the ignition.
Operating the top while driving (up to a speed of 50 km/h maximum):
Up to a pre-programmed speed (though not greater than 50 km/h), you can operate the top while driving.
Threshold speed adjustment:
Press the central switch for the window lifts in the drivers door in direction “close“ for >4s (windows must be closed) and the current speed will be set as new threshold limit. An acoustic signal will be sounded as confirmation that the new speed has been set. The maximum threshold speed is 50Km/h. The default programmed speed is 50Km/h for a new module.
Operating the top per OEM remote control:
Press the Open switch on the remote control >3s and the top will open automatically. Closing the top works in the same way except that the Close button on the remote control is used. When the switch is pressed again in the same direction while the roof moves, the windows will stay open at the end of the roof movement. As a safety precaution, opening the top can be terminated with the Close button or closing the top can be terminated with the Open button.
You can start the top's operation, start the engine and drive away while the top is still moving – it will continue the movement until it’s opened/closed completely.
Operating the windows per OEM remote control:
Press the close switch on the remote control 1..2s and the windows will close automatically. As a safety precaution, closing the windows can be terminated with the open button. The windows will close automatically when the top is open and the car will be locked out of safety reasons.
Automatic unlock when engine is turned off:
The car will be unlocked automatically when the engine is stopped.
Battery Safe Function:
The module will go to power down mode automatically when it is not needed. It will then consume less then 0,2mA – that means that the battery will not be discharged by the module.
Service mode for technical vehicle inspections and diagnostic purposes:
You can change the mode from normal mode to service mode (and back...) in the same way as speed limit is set, except that here the car is standing still. An acoustic signal will confirm the change of the mode. In service mode the module behaves like it would never have been installed. You even won’t find it with the BMW service tester.
Price
219 € plus shipping
advance payment only
Shipping in Germany 4,90
Shipping outside Germany 7,90
Pay comfortably with PayPal
The One Touch Module
How the module works
The installation of this module means that the switch no longer has to be held until the roof it completely open or closed. The roof switch need only be touched briefly (>0.5 sec) and the module extends the respective impulse so that the roof opens or closes fully automatically. The automatic movement of the roof can be stopped at any time by pressing either button again.
Before installation
Please read this instruction carefully and take yourself some time for proper installation of the module. Please note, that you can damage your car and/or the module if it is not correct installed.
Note
Installation of this module may be grounds to invalidate your vehicle's homologation (general type certification) and/or its manufacturer's warranty. The installation and use of this module is carried out at your own risk. Do not open or close the roof if people might be nearby the car. People could be injured through the use of this module.
Installation
The exact installation steps can be found in the installation instructions.
Download installation instructions
Price
99 € plus shipping
advance payment only
Shipping in Germany 4,90
Shipping outside Germany 7,90
Pay comfortably with PayPal
The 30mph Module
How the module works
If the module is installed, the roof of your car can be opened/closed up to a speed of 20, 30 or 50Km/h (programmable).
Before installation
Please read this instruction carefully and take yourself some time for proper installation of the module. Please note, that you can damage your car and/or the module if it is not correct installed.
Note
The installation and use of the module is on your own risk. Do not open/close the roof on bad roads. You can damage the roof by opening/closing while driving. You might loose the warranty of your car. The installation and use of this module is on your own risk.
Installation
The exact installation steps can be found in the installation instructions.
Download installation instructions
Technische Daten des Moduls
- Voltage range: 7-17V
- Current consumption: 12 mA (when ignition is on)
- Size: 40 x 40 x 20 mm3
- Weight: 50g
Price
99 € plus shipping
advance payment only
Shipping in Germany 4,90
Shipping outside Germany 7,90
Pay comfortably with PayPal
The Ideal Solution
The ideal solution includes the roof remote control, the roof automation and the 30mph module.
Function of the Ideal Solution
By installing the modules, the soft top opens and closes fully automatically using the standard remote control. By pressing the open or close button three times, the roof starts moving. The automatic run can be stopped at any time by pressing a button on the remote control again.
Furthermore the functions of the roof automatic and the 30mph module are integrated. The roof switch only has to be touched briefly to set the roof in motion. All this works up to a speed of 30mph or 50km/h. The standard safety is also maintained here: By pressing the switch again while the roof is moving, it is stopped immediately.
Note
For technical reasons, the roof remote control only works in conjunction with the 30mph module (included in the scope of delivery). The modules do not have an ABE.
Installation
The exact installation steps can be found in the installation instructions.
Download installation instructions
Price
219 € plus shipping
advance payment only
Shipping in Germany 4,90
Shipping outside Germany 7,90
Pay comfortably with PayPal
The Ideal Solution
How the module works
If the module is installed, the roof of your car can be opened/closed up to a speed of 50Km/h. The module affects the automatic lock and the speed-controlled wiper. The behaviour of the wiper up to 30mph or 50Km/h is the same as if the car is standing. The automatic door lock is operating above 30mph or 50Km/h.
Before installation
Please read this instruction carefully and take yourself some time for proper installation of the module. Please note, that you can damage your car and/or the module if it is not correct installed.
Note
The installation and use of the module is on your own risk. Do not open/close the roof on bad roads. You can damage the roof by opening/closing while driving. You might loose the warranty of your car. The installation and use of this module is on your own risk.
Installation
The exact installation steps can be found in the installation instructions.
Download installation instructions
Price
89 € plus shipping
advance payment only
Shipping in Germany 4,90
Shipping outside Germany 7,90
Pay comfortably with PayPal
The One Touch Module
How the module works
If the module is installed, the roof of your SLK can be opened/closed by a short tip on the top switch. Press the switch for about 1s and the top starts to move until it is open/closed. While opening/closing the movement of the top can be interrupted by another press on the the top switch.
Before installation
Please read this instruction carefully and take yourself some time for proper installation of the module. Please note, that you can damage your car and/or the module if it is not correct installed.
Note
Installation of this module may be grounds to invalidate your vehicle's homologation (general type certification) and/or its manufacturer's warranty. The installation and use of this module is carried out at your own risk. Do not open or close the roof if people might be nearby the car. People could be injured through the use of this module.
Installation
The exact installation steps can be found in the installation instructions.
Download installation instructions
Technische Daten des Moduls
Price
89 € plus shipping
advance payment only
Shipping in Germany 4,90
Shipping outside Germany 7,90
Pay comfortably with PayPal
The Comfort Module
How the module works
The module only uses functions which were originally built into the vehicle. All data relevant to convertible top control (e.g. limit switches, window position, speed) will be continuously monitored. All OEM safety functions (under / over voltage cut-off, thermal protection, etc.) remain intact. The module has no influence on other functions which are speed dependent (e.g. windscreen wiper interval or central locking). The ignition system will not be turned on while the convertible's top or the windows are controlled remotely – only the convertible top controller is active.
Operating the convertible top and windows with the radio-control key is independent of the optional infrared (IR) remote control for the convertible top. Control of the convertible top and windows is achieved via the same signal that is used for central locking – this does away with the need to "point" accurately at the door handle.
Before installation
Please read these instructions carefully and take your time with the installation. Performing the installation improperly can cause damage to the module or to electronic components in your vehicle. Claims cannot be asserted for consequences which arise out of disregard for these installation instructions. If you are not confident in doing the installation yourself, please obtain the services of a vehicle specialist.
Note
Installation of this module may be grounds to invalidate your vehicle's homologation (general type certification) and/or its manufacturer's warranty. Do not operate the convertible top or windows without the presence of another person – there is no entanglement protection. The installation and operation of the module is at your own risk
Installation
The exact installation steps can be found in the installation instructions.
Download installation instructions
The module's functional scope and operation
Tap function for the top's switch:
Now you need only to tap with your finger on the convertible top switch, then the top will automatically open or close. This automatic operation can be interrupted at any time by simply tapping on the switch again in any direction. You can start the top's operation, pull out the ignition key, get out of the car and lock it – the top will continue to automatically close or open without the ignition.
Operating the top while driving (up to a speed of 60 km/h maximum):
Up to a pre-programmed speed (though not greater than 60 km/h), you can operate the top while driving. If the top's operation is interrupted due to excessive speed, then it will automatically resume as soon as the speed drops down below the threshold again.
Threshold speed adjustment:
f, while driving, you press the telephone hang-up button on the steering wheel for longer than 3 s, this will automatically set the vehicle's current speed as the new threshold limit. An acoustic signal will be sounded as confirmation that the new speed has been set. The maximum permissible threshold speed is 60 km/h. Anytime the battery is disconnected, including during the initial installation of the module, a threshold speed of 30 km/h will be set by default.
Operating the windows per OEM remote control:
Press the Open switch on the remote control twice (in one second intervals) and all windows will open automatically. Closing the windows works in the same way except that the Close button on the remote control is used. As a safety precaution, closing the windows can be terminated at any time with the "Open" button on the remote control.
Operating the top per OEM remote control:
Press the Open switch on the remote control three times (in one second intervals) and the top will open automatically. Closing the top works in the same way except that the Close button on the remote control is used. As a safety precaution, opening the top can be terminated with the Close button or closing the top can be terminated with the Open button. You can start the top's operation, get into the car and drive away – the top will automatically open or close.
Double-click function of the top switch to close the windows:
A double-click on the top's switch in the close direction will cause all of the windows to close automatically.
Double-click function of the top switch to open the windows:
The original double-click function on the top switch in the open direction remains fully intact.
Service mode for technical vehicle inspections and diagnostic purposes:
When the vehicle's ignition key is in the Acc. position (ignition key position 2), the telephone hang-up button on the steering wheel can be held depressed for longer than 3 s to switch between service mode and normal mode. The module is completely passive in service mode, i.e. all functions operate as if no module was installed. The module cannot even be detected with vehicle diagnostic equipment. Service mode is confirmed by a three-pulse signal tone, normal operation with a single signal tone. Service mode is set by default after the battery has been disconnected or after the module is initially installed.
Price
219 € plus shipping
advance payment only
Shipping in Germany 4,90
Shipping outside Germany 7,90
Pay comfortably with PayPal
The Ideal Solution
The ideal solution includes the roof remote control, the roof automation and the 30mph module.
Function of the Ideal Solution
By installing the modules, the soft top opens and closes fully automatically using the standard remote control. By pressing the open or close button three times, the roof starts moving. The automatic run can be stopped at any time by pressing a button on the remote control again.
Furthermore the functions of the roof automatic and the 30mph module are integrated. The roof switch only has to be touched briefly to set the roof in motion. All this works up to a speed of 30mph or 50km/h. The standard safety is also maintained here: By pressing the switch again while the roof is moving, it is stopped immediately.
Note
For technical reasons, the roof remote control only works in conjunction with the 30mph module (included in the scope of delivery). The modules do not have an ABE.
Installation
The exact installation steps can be found in the installation instructions.
Download installation instructions
Price
219 € plus shipping
advance payment only
Shipping in Germany 4,90
Shipping outside Germany 7,90
Pay comfortably with PayPal
The 30mph Module
How the module works
If the module is installed, the roof of your car can be opened/closed up to a speed of 50Km/h (30mph).
Before installation
Please read this instruction carefully and take yourself some time for proper installation of the module. Please note, that you can damage your car and/or the module if it is not correct installed.
Note
The installation of the module may be against of traffic laws in your country. Also the warranty of the manufacturer of the car or third could be lost through the installation of this module. The use of this module may cause mechanical damages to the roof. We are not responsible for any damage caused by installation or use of this module.
Installation
The exact installation steps can be found in the installation instructions.
Download installation instructions
Technische Daten des Moduls
- Supply Voltage: 7-17V
- Power input: 12mA (when ignition is on)
- Size:40x40x20mm3
Price
89 € plus shipping
advance payment only
Shipping in Germany 4,90
Shipping outside Germany 7,90
Pay comfortably with PayPal
The One Touch Module
How the module works
If the module is installed, the roof of your car can be opened/closed by a short tip on the top switch. Press the switch for about 1s and the top starts to move until it is open/closed. While opening/closing the movement of the top can be interrupted by another press on the the top switch in any direction.
Before installation
Please read this instruction carefully and take yourself some time for proper installation of the module. Please note, that you can damage your car and/or the module if it is not correct installed.
Note
Please note, that you can damage your car and/or the module if it is not correct installed. The installation of the module may be against of traffic laws in your country. Also the warranty of the manufacturer of the car or third could be lost through the installation of this module.
Installation
The exact installation steps can be found in the installation instructions.
Download installation instructions
Technische Daten des Moduls
- Supply Voltage: 7-17V
- Power input: 5mA (when ignition is on)
- Size: 40 x 40 x 20 mm3
Price
89 € plus shipping
advance payment only
Shipping in Germany 4,90
Shipping outside Germany 7,90
Pay comfortably with PayPal
The Comfort Module
How the module works
The module only uses functions which were originally built into the vehicle. All data relevant to convertible top control (e.g. limit switches, window position, speed) will be continuously monitored. All OEM safety functions (under / over voltage cut-off, thermal protection, etc.) remain intact.
Operating the convertible top with the radio-control key is independent of the infrared (IR) remote control for the convertible top. Control of the convertible top is achieved via the same signal that is used for central locking – this does away with the need to "point" accurately at the door handle and it works in the full range of about 50m.
Before installation
Please read these instructions carefully and take your time with the installation. Performing the installation improperly can cause damage to the module or to electronic components in your vehicle. Claims cannot be asserted for consequences which arise out of disregard for these installation instructions. If you are not confident in doing the installation yourself, please obtain the services of a vehicle specialist.
Note
Installation of this module may be grounds to invalidate your vehicle's homologation (general type certification) and/or its manufacturer's warranty. Do not operate the convertible top without the presence of another person – there is no entanglement protection. The installation and operation of the module is at your own risk.
Installation
The exact installation steps can be found in the installation instructions.
Download installation instructions
The module's functional scope and operation
Tap function for the top's switch:
Now you need only to tap (>1s) with your finger on the convertible top switch, then the top will automatically open or close. This automatic operation can be interrupted at any time by simply tapping on the switch again in any direction. You can start the top's operation, pull out the ignition key, get out of the car and lock it – the top will continue to automatically close or open without the ignition.
Operating the top while driving (up to a speed of 60 km/h maximum:
Up to a pre-programmed speed (though not greater than 60 km/h), you can operate the top while driving.
Threshold speed adjustment:
If, while driving, you press the telephone hang-up button on the steering wheel for longer than 3 s, this will automatically set the vehicle's current speed as the new threshold limit. An acoustic signal will be sounded as confirmation that the new speed has been set. The maximum permissible threshold speed is 60 km/h. Anytime the battery is disconnected, including during the initial installation of the module, a threshold speed of 30 km/h will be set by default.
Operating the top per OEM remote control:
Press the Open switch on the remote control three times and the top will open automatically. Closing the top works in the same way except that the Close button on the remote control is used. As a safety precaution, opening the top can be terminated with the Close button or closing the top can be terminated with the Open button.
Service mode for technical vehicle inspections and diagnostic purposes:
When the vehicle's ignition key is in the Acc. position (ignition key position 2), the telephone hang-up button on the steering wheel can be held depressed for longer than 3 s to switch between service mode and normal mode. The module is completely passive in service mode, i.e. all functions operate as if no module was installed. The module cannot even be detected with vehicle diagnostic equipment. Service mode is confirmed by a three-pulse signal tone, normal operation with a single signal tone. Service mode is set by default after the battery has been disconnected or after the module is initially installed.
Price
219 € plus shipping
advance payment only
Shipping in Germany 4,90
Shipping outside Germany 7,90
Pay comfortably with PayPal
The Comfort Module
How the module works
The module uses only original existing functions in the vehicle. All data relevant for the hood control (e.g. limit switch, window position, speed) are permanently monitored. All standard safety functions (undervoltage/overvoltage cut-off, thermal protection, etc.) are retained.
Before installation
Please read these instructions carefully and take some time for installation. Improper handling can damage the module or the electronics of your vehicle. No claims can be made which are caused by non-observance of the installation instructions. If you do not have the confidence to install the electronics, please contact an automotive technician.
Note
Installation of the module may void the ABE and the manufacturer's warranty of your vehicle. The installation and operation of the module is at your own risk.
Installation
The exact installation steps can be found in the installation instructions.
Download installation instructions
Scope of functions and operation of the module
Tip function for the hood switch:
All you have to do is press the soft top switch briefly (2s) and the soft top will automatically open and close. The automatic run can be stopped at any time by pressing the switch in the opposite direction. If you press the switch again in the same direction during roof movement, the windows remain open, otherwise they close at the end of the roof run. When the roof is closed, the windows are automatically closed after the window frame is locked, there is no need to operate the roof switch again.
Operation of the soft top while driving up to max. 50Km/h:
The standard speed limit for the soft top control is raised to max. 50Km/h. If you press the ZV button (open or close, in the centre console) for longer than 4s while driving, the current speed is adopted as the new limit. You will hear an acoustic signal confirming the acceptance. The maximum permissible speed is 50Km/h. After disconnecting the battery or during initial installation, a speed of 50Km/h is programmed.
Operation of all 4 windscreen per hood switches:
You can open or close all four windows at once by pressing the soft top switch twice in succession (double click). Hold the second click until the windows move - then the switch can be released and the windows run automatically.
Battery Safe Function:
The module automatically detects when it is not in use and then goes into power saving mode. This ensures that the module does not load the battery even after a very long idle time.
Service mode for technical vehicle inspections and diagnostic purposes:
When the vehicle's ignition key is in the Acc. position (ignition key position 2), the telephone hang-up button on the steering wheel can be held depressed for longer than 3 s to switch between service mode and normal mode. The module is completely passive in service mode, i.e. all functions operate as if no module was installed. The module cannot even be detected with vehicle diagnostic equipment. Service mode is confirmed by a three-pulse signal tone, normal operation with a single signal tone. Service mode is set by default after the battery has been disconnected or after the module is initially installed.
Price
249 € plus shipping
advance payment only
Shipping in Germany 4,90
Shipping outside Germany 7,90
Pay comfortably with PayPal
The Comfort Module
How the module works
The module only uses functions which were originally built into the vehicle. All data relevant to convertible top control (e.g. limit switches, window position, speed) will be continuously monitored. All OEM safety functions (under / over voltage cut-off, thermal protection, etc.) remain intact. The module has no influence on other functions which are speed dependent (e.g. windscreen wiper interval or central locking). The ignition system will not be turned on while the convertible's top or the windows are controlled remotely – only the convertible top controller is active.
Operating the convertible top and windows with the radio-control key is independent of the optional infrared (IR) remote control for the convertible top. Control of the convertible top and windows is achieved via the same signal that is used for central locking – this does away with the need to "point" accurately at the door handle.
Before installation
Please read these instructions carefully and take your time with the installation. Performing the installation improperly can cause damage to the module or to electronic components in your vehicle. Claims cannot be asserted for consequences which arise out of disregard for these installation instructions. If you are not confident in doing the installation yourself, please obtain the services of a vehicle specialist.
Note
Installation of this module may be grounds to invalidate your vehicle's homologation (general type certification) and/or its manufacturer's warranty. Do not operate the convertible top or windows without the presence of another person – there is no entanglement protection. The installation and operation of the module is at your own risk
Installation
The exact installation steps can be found in the installation instructions.
Download installation instructions
The module's functional scope and operation
Tap function for the top's switch:
Now you need only to tap with your finger on the convertible top switch, then the top will automatically open or close. This automatic operation can be interrupted at any time by simply tapping on the switch again in any direction. You can start the top's operation, pull out the ignition key, get out of the car and lock it – the top will continue to automatically close or open without the ignition.
Operating the top while driving (up to a speed of 60 km/h maximum):
Up to a pre-programmed speed (though not greater than 60 km/h), you can operate the top while driving. If the top's operation is interrupted due to excessive speed, then it will automatically resume as soon as the speed drops down below the threshold again.
Threshold speed adjustment:
f, while driving, you press the telephone hang-up button on the steering wheel for longer than 3 s, this will automatically set the vehicle's current speed as the new threshold limit. An acoustic signal will be sounded as confirmation that the new speed has been set. The maximum permissible threshold speed is 60 km/h. Anytime the battery is disconnected, including during the initial installation of the module, a threshold speed of 30 km/h will be set by default.
Operating the windows per OEM remote control:
Press the Open switch on the remote control twice (in one second intervals) and all windows will open automatically. Closing the windows works in the same way except that the Close button on the remote control is used. As a safety precaution, closing the windows can be terminated at any time with the "Open" button on the remote control.
Operating the top per OEM remote control:
Press the Open switch on the remote control three times (in one second intervals) and the top will open automatically. Closing the top works in the same way except that the Close button on the remote control is used. As a safety precaution, opening the top can be terminated with the Close button or closing the top can be terminated with the Open button. You can start the top's operation, get into the car and drive away – the top will automatically open or close.
Double-click function of the top switch to close the windows:
A double-click on the top's switch in the close direction will cause all of the windows to close automatically.
Double-click function of the top switch to open the windows:
The original double-click function on the top switch in the open direction remains fully intact.
Service mode for technical vehicle inspections and diagnostic purposes:
When the vehicle's ignition key is in the Acc. position (ignition key position 2), the telephone hang-up button on the steering wheel can be held depressed for longer than 3 s to switch between service mode and normal mode. The module is completely passive in service mode, i.e. all functions operate as if no module was installed. The module cannot even be detected with vehicle diagnostic equipment. Service mode is confirmed by a three-pulse signal tone, normal operation with a single signal tone. Service mode is set by default after the battery has been disconnected or after the module is initially installed.
Price
219 € plus shipping
advance payment only
Shipping in Germany 4,90
Shipping outside Germany 7,90
Pay comfortably with PayPal
The Comfort Module
How the module works
The module only uses functions which were originally built into the vehicle. All data relevant to convertible top control (e.g. limit switches, window position, speed) will be continuously monitored. All OEM safety functions (under / over voltage cut-off, thermal protection, etc.) remain intact.
Before installation
Please read these instructions carefully and take your time with the installation. Performing the installation improperly can cause damage to the module or to electronic components in your vehicle. Claims cannot be asserted for consequences which arise out of disregard for these installation instructions. If you are not confident in doing the installation yourself, please obtain the services of a vehicle specialist.
Note
Installation of this module may be grounds to invalidate your vehicle's homologation (general type certification) and/or its manufacturer's warranty. Do not operate the convertible top without the presence of another person – there is no entanglement protection.
The installation and operation of the module is at your own risk.
Installation
The exact installation steps can be found in the installation instructions.
Download installation instructions
The module's functional scope and operation
Tap function for the top's switch:
Now you need only to tap (>2s) with your finger on the convertible top switch, then the top will automatically open or close. This automatic operation can be interrupted at any time by simply tapping on the switch again in the opposite direction. When the top switch is tapped again in the same direction while the roof moves, the windows will stay open at the end of the roof movement. You can start the top's operation, pull out the ignition key, get out of the car and lock it – the top will continue to automatically close or open without the ignition.
Operating the top while driving up to a speed of 60 km/h maximum:
The speed limit for top operation is set to 60Km/h.
Operating the top per OEM remote control:
Press the open switch on the remote control >3s and the top will open automatically. Closing the top works in the same way except that the close button on the remote control is used. As a safety precaution, opening the top can be terminated with the close button or closing the top can be terminated with the open button.
You can start the top's operation, start the engine and drive away while the top is still moving – it will continue the movement until it’s opened/closed completely.
Operating the windows per OEM remote control:
When top is closed and windows are still open they can be closed by a >3s press on the close button of the OEM key (same command as for closing the top by remote).
Battery Safe Function:
The module will go to power down mode automatically when it is not needed. It will then consume less then 0,2mA – that means that the battery will not be discharged by the module.
Service mode for technical vehicle inspections and diagnostic purposes:
Change to service mode:
Turn ignition on and press the central lock button at the drivers door for >5s: an acoustic signal will state that the module is “locked” – that means in workshop mode and behaves as it wouldn’t be installed. You even won’t find it with car diagnostic test equipment.
Change to normal mode:
Turn ignition on and press the central unlock button at the drivers door for >5s: an acoustic signal will state that the module is “unlocked” – that means all functions mentioned above are available now.
Price
219 € plus shipping
advance payment only
Shipping in Germany 4,90
Shipping outside Germany 7,90
Pay comfortably with PayPal
The Remote Roof Module
How the module works
By installing the module, the roof can be controlled with the standard remote control. When the car is closed, the opening of the canopy is triggered by pressing (within two seconds) twice the opening button on the remote control. When the car is open, pressing the close button on the remote control twice (within two seconds) triggers the canopy to close. In an emergency (jamming!!) the automatic opening can be stopped by pressing the close button. In the same way, the automatic closing can be stopped by pressing the Open button.
Before installation
Please read these instructions carefully and take some time for installation. Improper handling can damage the module or the electronics of your vehicle. No claims can be made which are caused by non-observance of the installation instructions. If you do not have the confidence to install the electronics, please contact an automotive technician.
Note
The installation of the roof remote control module may cause the ABE of your vehicle to expire. Do not operate the roof unattended. Installation and operation of the module is at your own risk.
Installation
The exact installation steps can be found in the installation instructions.
Download installation instructions
Price
109 € plus shipping
advance payment only
Shipping in Germany 4,90
Shipping outside Germany 7,90
Pay comfortably with PayPal
The One Touch Module
How the module works
By installing the module, it is no longer necessary to hold the top switch until the top is completely open or closed. The roof switch only has to be tapped (>0.5sec) and the module extends the respective impulse so that the roof opens or closes fully automatically. The automatic operation of the roof can be stopped at any time by pressing the switch again in any direction.
Before installation
Please read these instructions carefully and take some time for installation. Improper handling can damage the module or the electronics of your vehicle. No claims can be made which are caused by non-observance of the installation instructions. If you do not have the confidence to install the electronics, please contact an automotive technician.
Note
The installation of the automatic roof system can lead to the ABE of your vehicle being extinguished. The installation and operation of the module is at your own risk.
Installation
The exact installation steps can be found in the installation instructions.
Download installation instructions
Technical data of the module
- Operating voltage: 7-17V
- Power consumption: 6 mA (only if ignition is on)
- Size: 40 x 40 x 20 mm3
Price
89 € plus shipping
advance payment only
Shipping in Germany 4,90
Shipping outside Germany 7,90
Pay comfortably with PayPal
The 30mph Module
How the module works
By installing the module, the roof can also be opened or closed during travel up to a set speed of 20, 30 or 50Km/h. The roof can also be opened or closed during the cruise.
Before installation
Please read these instructions carefully and take some time for installation. Improper handling can damage the module or the electronics of your vehicle. No claims can be made which are caused by non-observance of the installation instructions. If you do not have the confidence to install the electronics, please contact an automotive technician.
Note
Installation of the module may void the General Operating License (ABE), warranty or guarantee of your vehicle. Do not operate the hood on bad roads and avoid shocks while the hood is moving. Installation and operation of the module is at your own risk.
Installation
The exact installation steps can be found in the installation instructions.
Download installation instructions
Technical data of the module
- Operating voltage: 7-17V
- Power consumption: 12 mA (only if ignition is on)
- Size: 40 x 40 x 20 mm3
Price
89 € plus shipping
advance payment only
Shipping in Germany 4,90
Shipping outside Germany 7,90
Pay comfortably with PayPal
The One Touch Module
How the module works
By installing the module, it is no longer necessary to hold the top switch until the top is completely open or closed. The roof switch only has to be tapped (>0.5sec) and the module extends the respective impulse so that the roof opens or closes fully automatically. The automatic operation of the roof can be stopped at any time by pressing the switch again in any direction.
Before installation
Please read these instructions carefully and take some time for installation. Improper handling can damage the module or the electronics of your vehicle. No claims can be made which are caused by non-observance of the installation instructions. If you do not have the confidence to install the electronics, please contact an automotive technician.
Note
The installation of the automatic roof system can lead to the ABE of your vehicle being extinguished. The installation and operation of the module is at your own risk.
Installation
The exact installation steps can be found in the installation instructions.
Download installation instructions
Technical data of the module
- Operating voltage: 7-17V
- Power consumption: 6 mA (only if ignition is on)
- Size: 40 x 40 x 20 mm3
Price
89 € plus shipping
advance payment only
Shipping in Germany 4,90
Shipping outside Germany 7,90
Pay comfortably with PayPal
The Comfort Module
How the module works
The module only uses functions which were originally built into the vehicle. All data relevant to convertible top control (e.g. limit switches, window position, speed) will be continuously monitored. All OEM safety functions (under / over voltage cut-off, thermal protection, etc.) remain intact.
Before installation
Please read these instructions carefully and take your time with the installation. Performing the installation improperly can cause damage to the module or to electronic components in your vehicle. Claims cannot be asserted for consequences which arise out of disregard for these installation instructions. If you are not confident in doing the installation yourself, please obtain the services of a vehicle specialist.
Note
Installation of this module may be grounds to invalidate your vehicle's homologation (general type certification) and/or its manufacturer's warranty. Do not operate the convertible top without the presence of another person – there is no entanglement protection. The installation and operation of the module is at your own risk.
Installation
The exact installation steps can be found in the installation instructions.
Download installation instructions
The module's functional scope and operation
One touch function for the top’s switch:
Now you need only to tap (>2s) with your finger on the convertible top switch, then the top will automatically open or close. This automatic operation can be interrupted at any time by simply tapping on the switch again in the opposite direction. When the top switch is tapped again in the same direction while the roof moves, the windows will stay open at the end of the roof movement. You can start the top's operation, pull out the ignition key, get out of the car and lock it – the top will continue to automatically close or open without the ignition.
Operating the top while driving (up to a speed of 60 km/h maximum):
Up to a pre-programmed speed (though not greater than 60 km/h), you can operate the top while driving. The default setting for a new module is 50Km/h.
Threshold speed adjustment:
Press the top switch in direction “close“ when top is closed or in direction “open” when top is open for >5s and the current speed will be set as new threshold limit. An acoustic signal will be sounded and a message will be displayed as confirmation that the new speed has been set. The maximum threshold speed is 60Km/h.
BOperating the top per OEM remote control:
Press the Open switch on the remote control >3s and the top will open automatically. Closing the top works in the same way except that the Close button on the remote control is used. When the remote switch is pressed again within 4s after the movement starts, the windows will stay open at the end of the roof movement. As a safety precaution, the top movement can be stopped later by pressing any button on the remotekey
You can start the top's operation, start the engine and drive away while the top is moving – it will continue the movement until it’s opened/closed completely.
One touch close for all windows:
A short tap on the central windows switch will close all windows automatically. The windows movement can be interrupted by pressing the switch again.
Automatic window movement while driving when top is open:
The windows will be closed if the car is faster then V_up and will open when the car slower than V_down. The windows movement can be interrupted by pressing the central window switch again.
When the module is new, this function is not enabled. It can be enabled when the car is standing and the central window switch is pressed >10s in direction „close“. The default setting for V_up is 50Km/h, for V_down 75Km/h.
An acoustic signal will be sounded and a message will be displayed as confirmation that the function was enabled/disabled. The speed setting for V_up (automatic close) can be set by holding the central window switch in „close“ direction while driving. The speed setting for V_down (automatic open) can be set by holding the central window switch in „open“ direction while driving. An acoustic signal will be sounded and a message1 will be displayed as confirmation that the new speed is set.
Battery Safe Funktion:
The module will go to power down mode automatically when it is not needed. So the battery will not be discharged by the module.
Service mode for technical vehicle inspections and diagnostic purposes:
When the vehicle's ignition key is in the Acc. position (ignition key position 2) and the top is closed the top switch can be held depressed for longer than 5 s to switch between service mode and normal mode. The module is completely passive in service mode, i.e. all functions operate as if no module was installed. The module cannot even be detected with vehicle diagnostic equipment. An acoustic signal will be sounded and a message1 will be displayed as confirmation that the mode has changed. Service mode is set by default after the battery has been disconnected or after the module is initially installed.
Price
249 € plus shipping
advance payment only
Shipping in Germany 4,90
Shipping outside Germany 7,90
Pay comfortably with PayPal
The One Touch Module
How the module works
By installing the module, it is no longer necessary to hold the top switch until the top is completely open or closed. The roof switch only has to be tapped (>0.5sec) and the module extends the respective impulse so that the roof opens or closes fully automatically. The automatic operation of the roof can be stopped at any time by pressing the switch again in any direction.
Before installation
Please read these instructions carefully and take some time for installation. Improper handling can damage the module or the electronics of your vehicle. No claims can be made which are caused by non-observance of the installation instructions. If you do not have the confidence to install the electronics, please contact an automotive technician.
Note
The installation of the automatic roof system can lead to the ABE of your vehicle being extinguished. The installation and operation of the module is at your own risk.
Installation
The exact installation steps can be found in the installation instructions.
Download installation instructions
Price
89 € plus shipping
advance payment only
Shipping in Germany 4,90
Shipping outside Germany 7,90
Pay comfortably with PayPal
The One Touch Module
How the module works
By installing the module, it is no longer necessary to hold the top switch until the top is completely open or closed. The roof switch only has to be touched briefly (>1s) and the module extends the respective impulse so that the roof opens or closes fully automatically. The automatic operation of the roof can be stopped at any time by pressing the switch again in any direction.
Before installation
Please read these instructions carefully and take some time for installation. Improper handling can damage the module or the electronics of your vehicle. No claims can be made which are caused by non-observance of the installation instructions. Installation may only be carried out by trained personnel.
Note
The installation of the automatic roof system can lead to the ABE of your vehicle being extinguished. The installation and operation of the module is at your own risk.
Installation
The exact installation steps can be found in the installation instructions.
Download installation instructions
Price
89 € plus shipping
advance payment only
Shipping in Germany 4,90
Shipping outside Germany 7,90
Pay comfortably with PayPal
The One Touch Module
How the module works
By installing the module, it is no longer necessary to hold the top switch until the top is completely open or closed. The roof switch only has to be touched briefly (>1s) and the module extends the respective impulse so that the roof opens or closes fully automatically. The automatic operation of the roof can be stopped at any time by pressing the switch again in any direction.
Before installation
Please read these instructions carefully and take some time for installation. Improper handling can damage the module or the electronics of your vehicle. No claims can be made which are caused by non-observance of the installation instructions. Installation may only be carried out by trained personnel.
Note
The installation of the automatic roof system can lead to the ABE of your vehicle being extinguished. The installation and operation of the module is at your own risk.
Installation
The exact installation steps can be found in the installation instructions.
Download installation instructions
Price
89 € plus shipping
advance payment only
Shipping in Germany 4,90
Shipping outside Germany 7,90
Pay comfortably with PayPal
The Comfort Module
How the module works
The module only uses functions which were originally built into the vehicle. All data relevant to convertible top control (e.g. limit switches, window position, speed) will be continuously monitored. All OEM safety functions (under / over voltage cut-off, thermal protection, etc.) remain intact.
Before installation
Please read these instructions carefully and take your time with the installation. Performing the installation improperly can cause damage to the module or to electronic components in your vehicle. Claims cannot be asserted for consequences which arise out of disregard for these installation instructions. If you are not confident in doing the installation yourself, please obtain the services of a vehicle specialist.
Note
Installation of this module may be grounds to invalidate your vehicle's homologation (general type certification) and/or its manufacturer's warranty. Do not operate the convertible top without the presence of another person – there is no entanglement protection.
The installation and operation of the module is at your own risk.
Installation
The exact installation steps can be found in the installation instructions.
Download installation instructions
The module's functional scope and operation
One touch function for the top's switch:
Now you need only to tap (>2s) with your finger on the convertible top switch, then the top will automatically open or close. This automatic operation can be interrupted at any time by simply tapping on the switch again in any direction. You can start the top's operation, pull out the ignition key, get out of the car and lock it – the top will continue to automatically close or open without the ignition.
Operating the top while driving (up to a speed of 60 km/h maximum):
Up to a pre-programmed speed (though not greater than 60 km/h), you can operate the top while driving.
Threshold speed adjustment:
If, while driving, you press the central open button in the drivers door for longer than 4s, this will automatically set the vehicle's current speed as the new threshold limit. An acoustic signal will be sounded as confirmation that the new speed has been set. The maximum permissible threshold speed is 60 km/h. Anytime the battery is disconnected, including during the initial installation of the module, a threshold speed of 50 km/h will be set by default.
Auto lock/unlock:
The vehicle will be locked automatically when it starts to move and will be unlocked by turning off the ignition.
Operating the top per OEM remote control:
Press the Open switch on the remote control three times and the top will open automatically. Closing the top works with the remote command "close – open – open". As a safety precaution, the top movement can be terminated with the close button. You can start the top's operation, then pull in the ignition key, start the car and drive away – the top will continue to automatically close or open.
One touch operation for the central window lift switch:
Now you need only to tap (>2s) with your finger on the central window lift switch, then the windows will automatically open or close. This automatic operation can be interrupted at any time by simply tapping on the switch again in any direction.
Service mode for technical vehicle inspections and diagnostic purposes:
The central open switch in the drivers door can be held >4s depressed to activate the module, to set the module into service mode (deactivate it) use the central lock. The module is completely passive in service mode, i.e. all functions operate as if no module was installed. The module cannot even be detected with vehicle diagnostic equipment. An acoustic signal will be sounded as confirmation when mode has changed. Service mode is set by default after the battery has been disconnected or after the module is initially installed.
Price
219 € plus shipping
advance payment only
Shipping in Germany 4,90
Shipping outside Germany 7,90
Pay comfortably with PayPal
The Comfort Module
How the module works
The module only uses functions which were originally built into the vehicle. All data relevant to convertible top control (e.g. limit switches, window position, speed) will be continuously monitored. All OEM safety functions (under / over voltage cut-off, thermal protection, etc.) remain intact.
Before installation
Please read these instructions carefully and take your time with the installation. Performing the installation improperly can cause damage to the module or to electronic components in your vehicle. Claims cannot be asserted for consequences which arise out of disregard for these installation instructions. If you are not confident in doing the installation yourself, please obtain the services of a vehicle specialist.
Note
Installation of this module may be grounds to invalidate your vehicle's homologation (general type certification) and/or its manufacturer's warranty. Do not operate the convertible top without the presence of another person – there is no entanglement protection.
The installation and operation of the module is at your own risk.
Installation
The exact installation steps can be found in the installation instructions.
Download installation instructions
The module's functional scope and operation
One touch function for the top's switch:
All you have to do is press the soft top switch briefly (2s) and the soft top will automatically open and close. The automatic run can be stopped at any time by pressing the switch in the opposite direction. If you press the switch again in the same direction during opening or closing, the windows will open fully, otherwise they will close at the end of the roof run. Once the roof barrel has started, it will continue without ignition - i.e. you can, for example, turn it off while the roof is closing, get out and leave or lock the car.
Operating the top while driving (up to a speed of 60 km/h maximum):
Up to a pre-programmed speed (though not greater than 60 km/h), you can operate the top while driving.
Operating the top per OEM remote control:
Press the Open switch on the remote control three times and the top will open automatically. Closing the top works with the remote command "close – open – open". As a safety precaution, the top movement can be terminated with the close button. You can start the top's operation, then pull in the ignition key, start the car and drive away – the top will continue to automatically close or open.
One touch operation for the central window lift switch:
Now you need only to tap (>2s) with your finger on the central window lift switch, then the windows will automatically open or close. This automatic operation can be interrupted at any time by simply tapping on the switch again in any direction.
Service mode for technical vehicle inspections and diagnostic purposes:
The central open switch in the drivers door can be held >4s depressed to activate the module, to set the module into service mode (deactivate it) use the central lock. The module is completely passive in service mode, i.e. all functions operate as if no module was installed. The module cannot even be detected with vehicle diagnostic equipment. An acoustic signal will be sounded as confirmation when mode has changed. Service mode is set by default after the battery has been disconnected or after the module is initially installed.
Price
219 € plus shipping
advance payment only
Shipping in Germany 4,90
Shipping outside Germany 7,90